Loading ...
Loading ...
Loading ...
ExternalControlDeviceSetup
01. Power (Command2:a)
• To control Power On/Off of the Monitor.
Transmission
I[k][a][ ][Set ID][ ][Data][Cr] J
Data 0 • Power Off 1 • Power On
Acknowledgement
I[a][ ][Set ID][ ][OK][Data][x] J
• To show Power On/Off.
Transmission
I[k][a][ ][Set ID][ ][FF][Cr] J
Data 0 : Power Off 1 : Power On
Acknowledgement
I[a][ ][Set ID][ ][OK][Data][x] J
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function.
02. Input Select (Command2:b) (Main Picture Input)
• To select input source for the Monitor.
You can also select an input source using the INPUT
SELECT button on the Monitor's remote control.
Transmission
IN[b][][Set ID][ ][Datal[Crl I
Data 0 :RGB 3
1 : Component 4
2 : Video
: S-Video
: DVI
Acknowledgement
J[b][ ][Set ID][ ][OK][Data][x] J
04. Screen Mute (Command2:d)
• To select screen mute on/off.
Transmission
[[k][d][ ][Set ID][ ][Data][Cr] ]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledgement
[[d][ ][Set ID][ ][OK][Data][x] ]
05. Volume Mute (Command2:e)
• To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[[k][e][ ][Set ID][ ][Data][Cr] J
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
Acknowledgement
[[e][ ][Set ID][ ][OK][Data][x] ]
06. Volume Control (Command2:f)
• To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
[[k][f][ ][Set ID][ ][Data][Cr] ]
Data Min :0-Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledgement
[[f][ ][Set ID][ ][OK][Data][x] ]
03. Aspect Ratio (Command2:c) (Main picture format)
• To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmfssion
J[k][c][ ][Set Ig][ ][gata][Cr] J
Data 0 : Wide screen (16:9)
1 : Normal screen (4:3)
2 : Full screen (Zoom)
3 : Horizon
Acknowledgement
J[c][ ][Set ID][ ][OK][Data][x] J
* You select either 16:9 or 4:3 screen aspect ratio using the
PC, DTV 720p/1080i.
07. Contrast (Command2:g)
• To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmission
[[k][g][ ][Set ID][ ][Data][Cr] ]
Data Min :0-Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledgement
I[g][][Set ID][ ][OK][Data][x] ]
* Real data mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
64 : Step 100
28 P_sma D_p_y
Loading ...
Loading ...
Loading ...