LG Electronics MU-42PZ44VS-AALZKZ LG plasma television

User Manual - Page 12

For MU-42PZ44VS-AALZKZ.

PDF File Manual, 36 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Instaflation
How to connect
1. Connect tile provided BNC-RCA adapter to the monitor's
VIDEO INPUT.
2. Connect the audio and video cables from the externa_
equipment's output jacks to the monitor input iacks, as
shown in the figure. When connecting the monitor to exter*
hal equipment, match the jack coiors (Video = yeJIow, Audio
Left = white,, and Audio Right = red)
How to use
1 Use the INPUT SELECT button on tl_e remote control to
select Video,
2. Operate the corresponding externaJ equipment. Refer to
extemat equipment operating guide.
Video _rn_ set
oooooo oooo _
or
DVD
How to cortnect
1 Conn_ the DVD video outputs to the COMPONENT (Y, Ps, PR)
iNPUT jac_ and connect the DVD audio outputs to the AUDIO
INPUT jacks on the monitor, as shown in the figure
2 tf your DVD only has an S-Video output jack, connect this to the
SoVIDEO input on the monitor and connect the DVD audio outputs
to tile AUDIO INPUT jacks, as shown in the figure.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use tile INPUT SELECT button on tile remote control to select
Component, (if connected to S-VIDEO select the S-Video exter*
nal inp_ source.)
3. Refer to the DVD ptayerts manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the compoo
nent input ports as si_own below.
Component ports of the
Mon_or
Video output ports
of DVD player
To watch digitally broadcast programs porchase and
connect a dig_al set-top box.
This monitor supports HDCP (High-bandwidth Digital
Contents Protection} protocol for DTV
(480p,720p, 1080i) modes.
How to connect
1. Use the monitor's COMPONENT (Y, P& PR) INPUT,
RGB or DVJ jack for video connections, depending on
your set4op box connector. Then, make the corre-
sponding audio connections.
How to use
1 Turn on tile digitaJ set4op box_ (Refer to the owner's
manual for the digitalset4op box,)
2 Use INPUT SELECT on the remote cotlro_ to select
Component RG8 or OVl.
or
Digital Set4op Box
12 P_sma D_p_y
Loading ...
Loading ...
Loading ...