DRAPER 20582 12V Cordless Air Compressor

User Manual - Page 14

For 20582.

PDF File Manual, 20 pages, Read Online | Download pdf file

20582 photo
Loading ...
Loading ...
Loading ...
5. HEALTH AND SAFETY INFORMATION
e) Do not overreach. Keep proper footing and balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5) Battery tool use and care
a. Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
b. Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c. When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
6) Service
a. Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
- 7 -- 14 -
9. OPERATION
9.1 INFLATING TYRES
1. Loosen the attachment lock approximately 3
rotations anticlockwise. Do not remove lock
completely.
2. Important: Insert the air hose with threaded
connector into the attachment lock. Press in
firmly while screwing in clockwise until it can go
no further.
3. Tighten attachment lock clockwise until
hand-tight to create an air tight seal around the
thread.
4. Press the Power button below the LCD display to
turn on.
Note: After 30 seconds of inactivity, the digital
tyre gauge will turn off automatically to conserve
energy.
5. To choose desired pressure format (PSI, BAR,
KPA), press the power button continuously until
desired format displays.
6. Screw the threaded connector onto tyre’s valve
stem. When connected, the gauge will show
current tyre pressure.
7. Press “+” or “-” to set desired pressure level.
Once set, wait a few seconds until current tyre
pressure displays.
Note: Always check and follow the
manufacturer’s recommended pressure, usually
located on the inside of the vehicles door.
8. Ensure trigger lock is in unlock position, press
the trigger.
9. The compressor will begin to inflate the tyre to
the set pressure level, and shut off automatically
when reached.
10. When done, press the trigger once to turn off, and slide trigger lock to lock position.
11. Remove the thread connector from the tyre quickly, and replace valve stem cap on tyre, if
required.
Note: Tyre pressures should be checked with a tyre pressure gauge to BSEN12645:1999.
Warning: Connector may be hot. Use caution when removing.
Note: To avoid over-inflation of tyres, please check the recommended tyre pressure in the
vehicle’s owner's manual.
For bicycle tyres, check markings on tyre.
Warning: The LCD display must turn on before operating air inflater.
Use a separate pressure gauge for more accurate reading.
FIG.8
FIG.9
FIG.10
Loading ...
Loading ...
Loading ...