Loading ...
Loading ...
Loading ...
8. PREPARING THE COMPRESSOR
8.1 CHARGING THE BATTERY
(230V MAINS) - FIGS. 1 & 2
Important: Charge for at least 3 hours before first
use.
Do NOT store battery inside unit when not in use.
1. Remove the battery from the compressor by
pressing locking tab and pulling battery
downwards.
2. Plug the 3 pin plug into a 230V mains socket
then connect the charger port to the battery
(fig. 3). The LED on the plug will illuminate red.
3. When LED on charger changes from red to
green, charging is finished. This may take up to
3 hour. Unit should run for approximately 15
minutes per charge.
Note: We recommend not charging the battery
for more than 5 hours.
5. HEALTH AND SAFETY INFORMATION
- 9 -
- 12 -
5.3 ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR 12V AIR
COMPRESSOR
1. This product is designed for occasional use. Inflation over a long period may over heat and
cause damage to this product and potential harm to user.
2. This product should not operate for more than 15 minutes at a time. After which it must be
switched off for at least 15 minutes.
3. Inspect your 12V Air Compressor and battery before each use. If damaged parts are found,
have this tool repaired by a qualified person.
4. Never expose the compressor or battery to rain, frost or temperatures above 50°C.
5. Never use the compressor near flammable fluids or gasses. Make sure your area is well lit.
6. Protect yourself against electric shock. Avoid contact with grounded surfaces such as pipes,
radiators, electric stoves, refrigerators etc.
7. Never leave children unattended with this compressor.
8. Never allow anyone to pump air into any body parts of people or animals. This air compressor
is not a toy.
5.4
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the machine’s rating plate is compatible with the power
supply you intend to connect it to.
This product comes supplied with a UK standard 3 pin plug fitted. It is designed for connection to a
domestic power supply rated at 230V AC.
This appliance is Class II† and is designed for connection to a power supply matching that detailed
on the rating label and compatible with the plug fitted.
If using an extension lead, follow the instructions that came with your lead regarding maximum
load while cable is wound, if in doubt ensure that the entire cable is unwound. Using a coiled
extension lead will generate heat which could melt the lead and cause a fire.
†Double insulated : This product requires no earth connection as supplementary insulation is
applied to the basic insulation to protect against electric shock in the event of failure of the basic
insulation.
Apart from replacing the fuse in the plug, no other electrical work is recommended on this
machine.
Note:
1. Typical run-time will vary depending on the
battery level, pressure load during use, and the
operating conditions.
2. High-pressure loading, or excessive back
pressure will result in a shorter run-time than
indicated.
3. Cold temperature conditions will reduce battery
run-time. We recommend using the 12V DC
Adaptor/Charger during cold temperature
conditions.
FIG.1
FIG.2
FIG.3
Loading ...
Loading ...
Loading ...