Loading ...
Loading ...
Loading ...
Troubleshooting
Problem
Possible cause
Solution
Noises
Error Codes
When some malfunctions come on, the appliance will display error codes to warn you:
Overflow.
Codes
Meanings
Possible Causes
Longer inlet time.
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
Some element of dishwasher leaks.
E1
E4
E8
Open circuit or break of distributary valve.
Improper
of orientation of distributary valve.
E9
Keep touching a button more than 30 seconds.
Water or something on the button.
If overflow occurs, turn off the main water supply before calling
service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
Detergent dispenser
will not shut
Water remains in the
dishwasher
Dishwasher does not
drain properly
Suds in the tub
Dishwasher leaks
Black or gray marks
on dishes
Stained tub interior
Dishwasher won't fil
Improper operation of the detergent cover
Previous cycle has not finished or has been
interrupted
Drain is clogged
Drain hose is kinked
Improper detergent is used
Excessive suds caused by using the improper
detergent
Dishwasher is not level
Aluminum utensils have rubbed against dishes
Coffee and tea soil
Reddish stain
Detergent cup opening\Drain pump sound
A hard object has entered the wash module. When
the object is ground up, the sound should stop.
Water valve is turn off
Door latch may not be properly seated
Add the detergent and rinse aid as
indicated by the manual
Select the proper cycle as introduced by
the manual
Check the air gap if you have
Make sure the drain hose is properly
connected to the sink
Make sure the disposer is empty if the
dishwasher is connected to the disposer
Make sure to use only the automatic
dishwasher detergent
Make sure to use only the automatic
dishwasher detergent
Leveling the dishwasher (see the
installation manual)
Chose a higher cycle
Some tomato food will cause this,use of
the rinse only cycle right after loading this
will decrease the staining
Using a spot cleaner to remove the soil
Make sure the inlet water is no less than 120℉
This is normal
Make sure the door is closed
Check if the water valve is turn on
If the noise persists after a complete cycle,
call for service.
WARNING
19
Loading ...
Loading ...