Loading ...
Loading ...
Loading ...
chimney bottom. Carefully place the decorative chimney bottom into
the recessed area of the hood body top.
5. Secure the chimney mounting bracket to the wall using (2) ST
x
14mm mounting screws and dry wall anchors.
6. Raise the decorative chimney top until its holes align with holes in the
chimney mounting bracket (located on the wall).
7. Level the hood and secure the chimney with 2 chimney bracket screws.
8. Fix the Decorative Chimney Bottom with 3 decorative Chimney Bottom
screws from inside of body.
Duct
(3) ST5
*45
Hoo
d Mou
nting
Bracket
(2) ST3.2*8
(2) ST4.2*30
Chim
ne
y Mounting
Bracket
1
、
2
、
3
、
4
、
5
、
6
、
(2) ST2.9*14
Deco
rative
Chimn
ey
Bottom
Chim
ne
y
Mounting
Bracket
(2) M
4*6
Deco
rative
Chimn
ey
Top
Deco
rative
Chimn
ey
Bottom
(2) ST4
.2*3
0
INSTALL FILTERS
1. To remove the grease filter, push in on the metal latch tab. This will
disengage the filter from the hood. Tilt the filter downward and
remove.
2. To install the grease filter, align rear filter tabs with slots in the hood.
Push in the metal latch tab, push filter into position and release. Make
sure the filter is securely engaged after assembly.
ST
(2) ST2.9*14
4
2.9
Loading ...
Loading ...