Loading ...
Loading ...
Loading ...
MAINTENANCE
HOW TO REPLACE THE FUSE 3
If the fuse is blown, the engine will not start. The location of the fuse
is next to the battery. Remove the fuse and replace with a 15 amp.
automotive fuse (Figure 34).
15 amp
Automotive Fuse
Figure
34
HOW TO REPLACE THE LIGHT BULB
2.
Raise the tractor hood.
Turn the light socket until the tabs on the socket align with the
notches in the bezel (Figure 35) Remove the light socket
Turn the light bulb and remove the bulb
Install a new light bulb. Align the light socket with the notches
in the bezel and turn the light socket to lock in position.
Ught Socket
Figure 35
HOW TO CLEAN THE MOWER HOUSING
l_ WARNING: Before you clean the mower housing,
stop the engine and disconnect the wire to the spark
plug.
Grass and other debris on top of the mower housing can keep the
belt from working correctly. For safety and correct operation,
frequently clean the t_p of the mower housing. Remove grass and
debris from around the pulleys and other moving parts.
1 Move the lever for the blade rotation control to the ENGAGE
position
2 Clean the top of the mower housing
3 Move the lever for the blade rotation contro! to the
DISENGAGE position,
4 Again clean the top of the mower housing.
5. After you cut the grass, clean the bottom of the mower housing.
STORAGE (over 30 days)
At the end of each year, prepare the unit for storage as follows
THE ENGINE
For storage information, see the the engine manufacturer's
instructions
THE BATTERY
! Remove the battery.
2 Clean the battery terminals of any deposits.
3. Charge the battery. See the instructions on "How To Prepare
And Charge The Battery".
4 Store the battery in a cool, dry place
NOTE: After a tong time in storage, charge the battery.
THE FUEL SYSTEM
,&
710846
WARNtNG: Do not drain the gasoline inside a build-
ing or near a fire. Do not smoke because the fumes
from the fuel can cause an explosion.
3O
1 Start the engine
2 Run the engine until the fuel tank and the carburetor are out of
fuel and the engine stops.
3 Do not leave fuel in the fuel tank or the carburetor. The fuel can
damage the function of the fuel system. Some models have a
fuel drain (Figure 36). Hold a cloth under the fuel drain Push
the fuel drain until the carburetor is empty
4. After storage, make sure you use fresh fuel.
Fuel Drain
CLEAN THE UNIT
1 Clean the dirt and grass from the engine
2. Clean the mower housing.
LUBRICATE THE UNIT
See the 'Lubrication" instructions rn this book
Figure 36
Loading ...
Loading ...
Loading ...