Loading ...
Loading ...
Loading ...
MAINTENANCE
M
0
W
E
R
PROCEDURE
3lade Rotation Control, Check
Motion Drive Belt, Check
Battery, Check and Charge
Lubrication
Hydrostahc:Goolmg Fan and Fms_Gheck
MAINTENANCE CHART
EACH
USE
FIRST-
2
HOURS
EVERY EVERY
25 50
HOURS HOURS
¢
¢
,/
,/
_ _ i_iiii_ii_i_i_ _ _ i _i_
" /_i_i!,iii!i!i_:i!!'iiiiiiilii!Li!iii_i!i_i_i_iliiii_i_i_ii_iillI
EVERY
100
HOURS
BEFORE
STORAGE
¢
¢
GENERAL RECOMMENDATIONS
1. The owner's responsibility is to maintain this product This will
extend the life of the product and is also necessary to mainlain
warranty coverage.
2. Check the spark plug, drive brake, lubricate the unit, and ciean
the air filter once a year.
3. Check the fasteners. Make sure all fasteners are tight,
4. Followthe Maintenance section to keep the unil ingood operat-
ing condition.
WARNING: Before you make an inspection, adjust-
ment, or repair to the unit, disconnect the wire to the
spark plug. Remove the wire from the spark plug to
prevent the engine from starting by accident.
NOTE: Torque is measured in foot pounds (metric Nm). This
measurement describes how tight a nut or bolt must be. The
torque is measured with a torque wrench.
HOW TO CHECK THE MUFFLER
Check the muffler every 50 hours. Make sure the muffler is correctly
mounted and is not loose. Ifthe muffler isworn or burnt, rep{ace with
a new muffler. A worn muffler isa fire hazard and can also damage
the engine.
If you mount a spark arrester to the muffler, also check the spark
arrester when you check the muffler. Ifthe spark arrester is worn or
damaged, replace it with a new spark arrester See your nearest
authorized service center for a spark arrester
710846 19
Loading ...
Loading ...
Loading ...