Loading ...
Loading ...
Failure to comply with these instructions may
result in a hazardous situation which, if not
avoided, may result in injury.
Spiders and small insects can spin webs and
nest in the grill BL transit and
warehousing as flow
obstruction around the
Burner FIRE"
can caus ate an
unsafe
:K
as folb o this
at least _ll or
whenever and if
your grill ha
period of time
1. Remove the the rear of each Main
Burner using a Phillips Head Screwdriver.
2. Carefully lift each Burner up and away from the
Gas Valve Orifice.
3. Check and clean Burner/Venturi Tubes for
insects and insect nests. A clogged tube can
lead to a fire beneath the grill.
4. Refer to the figure below and perform one of
these 3 cleaning methods:
[] METHOD 1: Bend a stiff wire or wire coat
hanger into a small hook as shown and run
the hook through the Burner Tube and inside
the Burner several times to remove debris.
TO CLEAN BURNERTUBE,
INSERT HOOK Burner Port
HERE L_ Foo_
_Burner Tube
[] METHOD 2: Use a bottle brush with a flexible
handle and run the brush through the Burner
Tube and inside the Burner several times to
remove any debris.
[] METHOD 3: Use an air hose to force air
through each Burner Tube. The forced air
should pass debris or obstructions through
the Burner and out the Ports.
For safe operation ensure the Gas Valve Assem-
bly Orifice is inside the Burner Tube before using
your grill. See figure. If the Orifice is not inside
the Burner Tube, lighting the Burner may cause
explosion and/or fire resulting in serious bodily
injury and/or property damage.
Gas VaIve AssembIy Orifice
\
\
Burner Tube
To expedite the assembly process follow these
general guidelines:
[] Tools Required forAssembly :
• protective work gloves
• Phillips Head Screwdriver
[]
[]
[]
While it is possible for one person to unpack this gas
grill, obtain assistance from another person when
handling the large pieces.
Use the Hardware and Part Diagrams to ensure all
items are included and free of damage.
Do not assemble or operate the grill if it appears
damaged. If there are damaged or missing parts
when you unpack the shipping box or you have
questions during the assembly process, call the:
Grill Information Center 1-888-317-7642
8am-8pm CST, Monday throu.qh Friday
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Storage and Handling of
Liquefied Petroleum Gases, ANSI/NFPA58,Natural Gas
and Propane Installation Code, CSA B149.1, Propane
Storage and Handling Code, B149.2.
When using electrical appliances, basic
safety precautions should always be used.
If you smell gas:
1. Shut off gas to the appliance.
2 Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from
the appliance and immediately call
your gas supplier or your fire
department.
• This appliance, when installed, must be electri-
cally grounded in accordance with local codes
or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.1.
• Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces.
Loading ...
Loading ...
Loading ...