Loading ...
Loading ...
Loading ...
11
GeneralCare&Cleaning
ChangingtheOvenLight(some models)
On some models, the oven light automatically turns on when the door is opened. Some
models have a switch located on the control panel to turn on the light. The oven light is
located at the rear of the oven.
Toreplacetheovenlight:
1. Turn electrical power off at the main source or unplug the range.
2. Replace bulb with a new 40 watt appliance bulb.
3. Turn power back on again at the main source (or plug the range back in).
4. The clock will then need to be reset. To reset, see SettingtheClockandMinute
Timer in this Use & Care Guide (some models).
Be sure the range is unplugged and all parts are COOL before
replacing oven light. Wear a leather-faced glove for protection against possible
broken glass.
Removing and replacing the lift-o oven door
To avoid possible injury when removing or replacing the oven door,
follow the instructions below carefully and always hold the oven door with both hands
positioned away from the door hinge area.
The door is heavy. For safe, temporary storage, lay the door at with
the inside of the door facing down.
To remove oven door:
1. Open oven door completely (horizontal with oor - See Fig. 1).
2. Pull the door hinge locks on both left and right door hinges down from the oven
frame completely towards the oven door (See Fig. 2). A tool such as a small at-
blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door sides (Do not use the oven
door handle - See Fig. 3).
4. Close the door to the broil stop position (the oven door will stop into this position
just before fully closing).
5. With the oven door in the broil stop position, lift the oven door hinge arms over
the roller pins located on each side of the oven frame (See Fig. 4).
To replace oven door:
1. Firmly grasp both sides of oven door along the door sides (Do not use the oven
door handle - See Fig. 3).
2. Holding the oven door at the same angle as the removal position, seat the hook
of the hinge arm over the roller pins located on each side of the oven door frame
(See Fig. 4). The hook of the hinge arms must be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with oor - See Fig. 1).
4. Push the door hinge locks up towards and into the oven frame on both left and
right oven door hinges (See Fig. 2) to the locked position.
5. Close the oven door.
Special door care instructions - Most oven doors contain glass that can break. Read
the following recommendations:
• Do not close the oven door until all the oven racks are fully in place.
• Do not hit the glass with pots, pans, or any other object.
• Scratching, hitting, jarring or stressing the glass may weaken its structure causing
an increased risk of breakage at a later time.
about
10°
hinge
oven
door
Oven door
hinge
locations
Fig. 3
Fig. 1
Fig. 4
Fig. 2
roller
pin
hinge
arm
L
O
C
K
Loading ...
Loading ...
Loading ...