Craftsman 917270662 tractor

User Manual - Page 29

For 917270662.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART
PROBLEM
Will not start
CAUSE
1o Out of fuelo
2o Engine not "CHOKED"
properly.
3, Engine flooded,
Hard to start
4. Bad spark plug,
5_ Dirty air filter.
6, Dirty fuel filter°
7. Water in fuel
8, Loose or damaged wiring,
9. Carburetor out of adjustment
10, Engine valves out of
adjustment.
1_ Dirty air filter.
2. Bad spark plug.
3. Weak or dead battery,
4. Dirty fuel filter,
5, Stale or dirty fuel.
6. Loose or damaged wiring,
7. Carburetor out of adjustmenL
8. Engine valves out of
adjustment°
CORRECTION
1, Fill fuel tank.
2. See "TO START ENGINE"
in Operation section,
3. Wait several minutes before
attempting to start.
4_ Replace spark plug.
5,, Clean/replace air filter.
6. Replace fuel filter°
7, Drain fuel tank and carbure
tor, refill tank with fresh
gasoline and replace fuel
filter,
8, Check all wiring.
9. See "To Adjust Carbureto¢'
in Service Adjustments
section,
10.Contact a qualified
service center.
1. Clean/replace air filter°
2o Replace spark plug.
3_ Recharge or replace battery.
14o Replace fuel filten
5o Drain fuel tank and refill with
fresh gasoline.
i6. Check all wiring.
7. See "To Adjust Carburetor" in
Service Adjustments
sectiom
8. Contact a qualified
sen,ice center_
Engine will not
turn over
!2.
3o
L4,
i5o
i6.
17.
8,
9.
Clutch/brake pedal not
depressed
Attachment clutch is
engaged°
Weak or dead battery.
Blown fuse.
Corroded battery terminals.
Loose or damaged wiring°
Faulty ignition switch.
Faulty solenoid or starter.
Faulty operator presence
switch(es).
!o Depress clutch!brake pedal°
!2, Disengage attachment
clutch°
!3. Recharge or replace battery.
i4_ Replace fuse.
15. Clean battery terminals,
i6, Check all wiring.
7, Check!replace ignition
switch,
8, Check/replace solenoid or
starter.
9. Contact a qualified
service centen
Engine clicks but
wilt not start
1o
i2.
3.
Weak or dead battery. 1. Recharge or replace battery.
Corroded battery terminals. 2_ Clean battery terminals.
Loose or damaged wiring. 3. Check all wiring°
Faulty solenoid or starter. 4_ Check/replace solenoid or
starten
29
Loading ...
Loading ...
Loading ...