Loading ...
Loading ...
Loading ...
Positive Terminal Negative Te
Keps
._. Nut Hex
ed
Battery
Positive Terminal Neg
REPLACING BA'I-I'E RY
z_
_,CAUTION: Do not short battery
terminals by allowing a wrench or any
other object to contact both terminals at
the same time. Before connecting battery,
remove metal bracelets, wristwatch
bands, rings, etco
Positive terminal must be connected first
to prevent sparking from accidental
grounding.
I. Lift seat pan to raised position and
open battery box door.
2. Disconnect BLACK battery cable first
then RED battery cable and carefully
remove battery from tractor.
3. Install new battery, with terminals in
same position as old battery.
4. First connect RED battery cable to
positive (+) terminal with hex bolt and
keps nut as shown. Tighten securely.
5. Connect BLACK grounding cable to
negative (-) terminal with remaining
hex bolt and keps nut. Tighten
securely,
6. Close battery box door.
Seat
Box Door
(Red)
Cable
Negative (Black)
Cable
TO
1.
2.
REPLACE HEADLIGHT BULB
Raise hood.
Pul! bulb holder out of the hole in the
backside of the grill°
3. Replace bulb in holder and push bulb
holder securely back into the hole in
the backside of the grill.
4. Close hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your
tractor to run poorly, stop running, or
prevent it from starting.
• Check wiring. See electrical wiring
diagram in the Repair Parts section.
TO REPLACE FUSE
Replace with 15 amp automotive4ype
plug-in fuse. The fuse holder is located
behind the dash.
TO REMOVE HOOD AND GRILL
ASSEMBLY
1o Raise hood°
2o Unsnap headlight wire connector.
3. Stand in front of tractor, Grasp hood at
sides, tilt toward engine and lift off of
tractor.
4. To re _lace, reverse above procedure.
\
_i H°°d
1'2htoWire
26
Loading ...
Loading ...
Loading ...