Loading ...
Loading ...
Loading ...
12
12
WWW.VINOTEMP.COM
temperature of the LOWER temperature zone. When you press either key at the first time,
the display will show the last temperature set previously.
• IMPORTANT: The temperature set for the LOWER temperature zone must always be just as
high as or higher than that in the UPPER temperature zone. For optimal performance, the set
temperature of the two zones should differ by at least 4°C (7F°).
• The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once,
on the contrary the temperature will decrease 1ºC or 1ºF if you press the DOWN key once.
The display flashes while you make the setting.
• After the temperature has been set, the display shows the current inner temperature of the
particular temperature zone.
• To view the set temperature at any time, press the UP or DOWN key, the set temperature
will temporarily flash in the display for 5 seconds. Then the display shows the current inner
temperature again.
INTERIOR LIGHT
• The interior light makes it easy to view your items. Touching the LIGHT mark toggles between
2 modes of operation for the internal lights: functional (default) mode and showcase mode.
If you are in functional (default) mode, the lights will turn on only when the door is open. If
you are in showcase mode, the lights will be on whether or not the door is open.
NOTE: When using the unit for the first time or after a long period of inactivity, there may be a
variance of a few degrees between the selected temperature and the temperature indicated on
the LED readout. This is normal due to the length of inactivity, and will correct itself after the
unit is run for a few hours. If the unit is unplugged, has lost power or is turned off, wait 3 to 5
minutes before restarting the unit. The unit will not restart before this time delay.
DYNAMIC COOLING/SILENT MODES
The Dynamic Cooling feature enables the temperature to be distributed evenly around the
interior so you can store all your goods under exactly the same excellent conditions.
In the Dynamic Cooling mode, the interior fan circulates the inside air evenly even when the set
temperature is reached. Dynamic Cooling mode is NOT the factory preset mode because of
creating noises and more energy consumption. To change to Dynamic Cooling mode, touch and
hold the DOWN key for approximately five seconds. The appliance will beep five times to confirm
Dynamic Cooling mode is on. To change back to default (Silent) mode, touch and hold the UP
key for approximately five seconds. The appliance will beep three times to confirm default (Silent)
mode is on.
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off
the displays, interior light and audible alarms and prevents them from turning on again. Normal
cooling operations will still take place.
Loading ...
Loading ...
Loading ...