Loading ...
Loading ...
Loading ...
INSTALLATION ]
Connecting to a Cab|e Box that Descramb|es Some Channels
If your cable box descrambles only some channels (such as premium channels), follow
the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four
lengths of coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnectthe
cable that is connec_ea to
the ANTENNA IN
terminal on your came BOX.
_1_ ANTENNA
,N
CableBox
4 This terminal might be labelled
'ANT IN,'VHF1N orsimply,
'IN.
2
Connect this cable to a two-
way splitter.
Connect a coaxial cable
between an OUTPUT
terminal on the splitter and
the IN terminal on the cable
box
3
Connect a coaxial cable
between the ANTENNA OUT
terminal ontbe cable box
ane the B-IN tE"minal on the
RRA!B) ewltcn.
Incoming Cable
Splitter
,,_
Cable Box
;able
Splitter
Cable Box
RF(A/B)
Switch
4
Connec] aeomer cable
be.tweenthe other OUT
terminal on the el: tter
and the A-IN terminal oe
the RF (A/B} sw tch.
incoming
Cable
Splitter
RF (A/B)
Cable Box Switch
ANT 1 N
ConnectthE ast coaxial
cable between the OUT
terminal on the RF'A/B} incoming
switch and the 'VHF/UHF" Cable
terminal on the rear panel Splitter RF(A/B)
CableBox Switch A_2 N
(CABLe}
TVRear
After you've made this connection, set the A/B switch to the A" position lotnomml
viewing. Set the A/B switch to the 'B" position to view scrambled channels. (When you set
the A/B switch to 'B", you will need to tune your TV to the cable box% octtput channel,
which is usually channel 3 or 4.)
English - 16
Loading ...
Loading ...
Loading ...