Loading ...
Loading ...
Loading ...
31
BURNER AIR SHUTTER ADJUSTMENT
Important: This appliance may not light or heat evenly
or cook properly unless the air shutters
are adjusted following installation (see
AIR SHUTTER ADJUSTMENT section).
Burner air shutters are easily accessed by removing the
control panel. See the CONTROL PANEL REMOVAL
section for access.
The air shutters are located on the front portion of each
burner and have a locking screw that prevents the air
shutter from inadvertent movement (see Fig. 31-1).
Remove the cooking grids & vaporizer panels from the grill.
To close or open the
air shutters, simply
loosen the locking
screw, using a long
stemmed Phillips
screwdriver, and turn
the air shutter to open
or close it. Tighten the
screws down when
the desired setting is
achieved.
Main Burner
Light the burner to be adjusted in accordance with the
LIGHTING INSTRUCTIONS and burn for 2 minutes with
the burner control knob set to HIGH and the oven open.
After burning for 2 minutes, open the air shutter until the
flames lift off, or appear not to be touching the burner.
Then begin closing the air shutter until the flames appear
to burn while touching the burner ports (Fig. 31-2). If
flames are a lazy yellow, open the air shutters until the
flame is mostly blue.
Note: Grills in some installations achieve a better
air/gas mixture and will ignite more quickly
if the valve is first turned beyond HIGH to
MEDIUM or LOW for lighting.
Fig. 31-1
Locking
screw
Air shutter
Fig. 31-2 - Flame appearance diagram
Flame off ports
Flame on ports
SERVICING AND CLEANING (Cont.)
Loading ...
Loading ...
Loading ...