Kenmore 11028132412 Use & Care Guide

Loading ...

6. Add liquid fabric softener

or Oxi to dispenser

Pour a measured amount of liquid fabric softener

or Oxi-type boosters into tray; always follow

manufacturer’s directions for correct amount of

fabric softener or Oxi based on your load size.

Close dispenser drawer, then select TimedOxi

and/or Fabric Softener option. Oxi is added

during main wash and Fabric Softener is added during rinse�

IMPORTANT: TimedOxi and/or Fabric Softener option must

be selected to ensure proper distribution at correct time in

cycle. Do not overll or dilute. Overlling dispenser will cause

fabric softener to immediately dispense into washer�

If Two Rinses option is selected, fabric softener will be

dispensed into the last rinse�

It is normal for a small amount of water to remain in the

dispenser at the end of a cycle�

Liquid

Chlorine Bleach

5. Add liquid chlorine bleach to dispenser

Do not overll, dilute, or use more than 1 cup (236 mL).

Do not use color-safe bleach or Oxi products in the same

cycle with liquid chlorine bleach�

Fabric softener tray

Add a measured amount of HE liquid

detergent into detergent tray� This tray holds

3 oz. (89 mL). If adding powder HE detergent, remove inside

tray. Do not overll tray – adding too much detergent may

cause detergent to be dispensed into the washer too early�

NOTE: Make sure tray is in drawer when using liquid detergent

and removed when using powder detergent� Do not go over the

Max line.

IMPORTANT: Use only High Eciency detergents. The package

will be marked “HE” or “High Eciency.” Low-water washing

creates excessive sudsing with a non-HE detergent. Using

non-HE detergent will likely result in longer cycle times and

reduced rinsing performance� It may also result in component

malfunction and, over time, buildup of mold or mildew� HE

detergents should be low-sudsing and quick-dispersing to

produce the right amount of suds for the best performance�

They should hold soil in suspension so it is not redeposited onto

clean clothes. Not all detergents labeled as High Eciency

are identical in formulation and their ability to reduce suds�

For example, natural, organic, or homemade HE detergents

may generate a high level of suds� If you use one of these

and see an “F0E2” error code appear in the display, consider

using a dierent HE detergent. Always follow the detergent

manufacturer’s instructions to determine the amount of

detergent to use. Do not go over the Max line on the dispenser.

HELPFUL TIP: See “Washer Maintenance” for information on

the recommended method of cleaning washer dispenser trays�

4. Add HE detergent

HE removable

detergent tray

NOTE: Do not add single-dose laundry packets, color-safe

bleach, or fabric softener crystals to dispensers� They will not

dispense correctly�

Using Laundry Product Dispensers

Oxi tray

7. Touch Power button to turn on washer

Make sure the dispenser drawer is closed completely, then

touch the Power button to turn on the washer� Other methods

of turning the washer on include opening the lid or turning

the Wash Cycle knob�

Loading ...

Kenmore 11028132412 Top-Loading High Efficiency Low-Water Washer

Use & Care Guide - Page 10