Mackie MK-BIG-KNOB-S Big Knob Studio Monitor Controller And Interface

User Manual - Page 17

For MK-BIG-KNOB-S.

PDF File Manual, 25 pages, Read Online | Download pdf file

MK-BIG-KNOB-S photo
Loading ...
Loading ...
Loading ...
17
Owner’s Manual
Owner’s Manual
34. Monitor Select Buttons
These buttons turn the output signals connected to
Big Knob on and off. Press these buttons to route the
currently selected input source(s) to the currently
selected monitor output jacks. Engaged buttons will
illuminate green.
Any combination of outputs may be turned
on simultaneously. For example, you
could have one, two, or all three
1
monitor
outputs turned on at the same time. This
way, a pair of full-range speakers could be
connected to the monitor A and B jacks and a subwoofer
to the monitor C jacks. The monitor C button could then
be used as a “subwoofer in / out” button to compare the
sound with and without the subwoofer. More importantly,
your friends will call you a genius...and that’s what really
counts, right?!
35. Trim Knobs
The trim knobs adjust the sensitivity of the monitor
output signals. They may be adjusted to any setting
between –12 dB and 0 dB [unity at 0 dB] to precisely
match the levels among the monitor outputs
.
The Big Knob Studio has two trim knobs while the Big
Knob Studio
+
possesses an additional trim knob.
36. Talkback Level Knob
This knob controls the talkback level. The gain is off
when fully counter-clockwise (–) and is at maximum
gain when fully clockwise (max).
1
The Big Knob Studio has two monitor select buttons, while
the Big Knob Studio+ possesses an additional monitor select
button.
34
35
36 37 38
37. To 2-Track Button [Big Knob Studio
+
]
When this momentary button is engaged and held,
talkback is routed to the 2-track outputs and USB when
the Rec Src Select switch is disengaged. Additionally,
when engaged
the
button will illuminate white.
The To 2-Track and To Cue buttons may
be engaged simultaneously. The footswitch,
however, overrides both buttons.
38. To Cue Button
When this momentary button is engaged and held,
talkback is routed to the studio outputs and phones
outputs.
Additionally, when engaged,
the signal is dimmed
by 20 dB and the
button will illuminate white.
The To 2-Track and To Cue buttons may
be engaged simultaneously. The footswitch,
however, overrides both buttons.
Loading ...
Loading ...
Loading ...