Zline DWMTZ30424MB Autograph Edition Series 24 Inch Stainless Steel Built-In Fully Integrated Dishwasher

User Manual - Page 32

For DWMTZ30424MB.

PDF File Manual, 34 pages, Read Online | Download pdf file

DWMTZ30424MB photo
Loading ...
Loading ...
Loading ...
5857
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The dishwasher
won’t start
The door may not be closed
properly.
Make sure that the door is
closed and latched.
The power is off or not
connected.
Make sure that the power is
connected and turned on.
The delay start option is selected. Refer to the “Delay” section
under
“Controls and indicators”
on page 40.
The dishwasher
beeps at the end
of the cycle
This is normal and indicates
that the wash cycle is complete.
The rinse aid light
is on
The rinse aid level is low. Add rinse aid.
The dishwasher
runs too long
The dishwasher is connected to a
cold water supply.
Make sure that the dishwasher is
connected to a hot water supply.
If not, change the water supply
to a hot water source.
The cycle time varies, depending
on the soil level of the dishes.
When heavy soil is detected, the
wash times will be longer.
Depends on the option selected. Some options will add time to
the cycle.
TROUBLESHOOTING
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The dishes are not
clean enough
The water pressure is too low. Make sure that the water
pressure is above 20 psi. Use
your dishwasher when water
demand is low.
The inlet water temperature is
too low.
Make sure that the dishwasher is
connected to a hot water supply.
If not, change the water supply
to a hot water source. Use your
dishwasher when hot water
demand is low.
Dishes are too close together. Reload the dishwasher as shown
in “Preparing and Loading
Dishes” on page 42.
Improper use of detergent. Add detergent depending on
the water hardness and washing
cycle you choose. Use fresh
detergent.
The selected cycle is not suitable
for the soil level on the dishes.
Choose a different cycle with a
longer washing time.
The spray arms are blocked. Make sure that the spray arms
are not blocked and are free to
rotate.
The dishes are not
drying enough
The rinse aid dispenser is empty
or the setting is too low.
Fill the rinse aid dispenser.
Increase the rinse aid setting.
Dishes are loaded improperly. Reload the dishwasher as shown
in
“Preparing and Loading
Dishes” on page 42.
The cycle you chose did not
include drying.
Choose a cycle with drying.
TROUBLESHOOTING
Troubleshooting
Loading ...
Loading ...