Loading ...
Loading ...
Loading ...
4039
OPERATION
USING THE CONTROL PANEL
Your dishwasher’s control panel is located on the top edge of the door. The door must
be open to make settings and operate the dishwasher.
POWER On/Off - 3sec - Hold this button down for three seconds to turn the power
on or off.
CYCLES
Select a cycle based on the type of dishes to be washed and the level of soil on the
dishes. Cycle times are approximate and will vary with options selected. The timer
will be delayed to allow for the water to heat for the main wash of all cycles if the
sensor detects the water is not hot enough. Below is water use and cycle times under
standard conditions.
Control Panel
# CYCLE DESCRIPTION WATER USE
CYCLE TIME
(MINUTES)
1 AUTO Auto sensing wash, lightly, or
heavily soiled crockery, with or
with out dried-on food.
3.0 - 5.9 gal. 100 - 133
2 NORMAL Use for regularly soiled dinner
dishes or silverware.
3.0 - 5.9 gal. 102 - 120
3 HEAVY Use for hard-to-clean, heavily
soiled dishes, pots, and pans.
6.9 gal. 13 8
4 DELICATE Use for lightly soiled crockery
and glass.
5.9 gal. 114
5 EXPRESS Use for lightly soiled and pre-
rinsed dishes and silverware.
4.0 gal. 60
6 RINSE Use for pre-rinsing dishes or
glasses. This is only a rinse that
keeps food from drying on
your dishes and reduces odor
buildup in your dishwasher until
you are ready to wash a full
load. Do not use detergent.
2.0 gal. 20
OPERATION
Control Panel
CONTROLS AND INDICATORS
Options can add enhancements to the cycle selected.
7. DISPLAY - Shows the remaining hours and minutes of the current cycle, delay
hours remaining, and error codes (
see “Error Codes” on page 56).
8. Rinse Aid - Turns on when you need to add rinse aid.
9. Sanitized - Turns on when a sanitized cycle is finished. Turns off after 30
seconds, when the door is opened.
10. Clean - Turns on after a cycle finished. Turns off after 30 seconds when the
door is opened.
11 . DELAY - Press repeatedly to delay the start of the selected wash cycle until the
delay time you want is shown on the display. “H” will show. This is not an error
code. You can select from one to 24 hours delay. After you select the delay
time you want, press START/CANCEL once, then close the door within four
seconds. The delay begins to count down. If you open the door while delay is
running, press the START/CANCEL, then close the door within four seconds to
begin the cycle from that point. To cancel the delay and begin the cycle before
the delay period is complete, open the door, then press and hold DELAY for
three seconds.
OPTIONS
12. HEATED DRY - Use to heat-dry your dishes. This function is not available for
rinse only cycle.
13. SANITIZE - Use to sanitize your dishes and glassware. Maintains the water
temperature at158° F max., and is available with the AUTO, NORMAL, and
HEAVY cycles.
Note:
• Certified residential dishwashers are not intended for licensed food establishments.
• The sanitize cycle is NSF certified.
Loading ...
Loading ...
Loading ...