Loading ...
Loading ...
Loading ...
1615
Door Balance
STEP 2: CHECK THE DOOR BALANCE
CAUTION
Opening the door of your dishwasher before it is installed will cause
it to tip forward. Do not open the door until you are ready to install
your dishwasher.
If it is necessary to open the door, hold the top of the dishwasher
securely with one hand and hold the door with the other hand.
1. Hold the top of the dishwasher firmly.
2. Open the door slowly, then release it. If the door drops, increase the spring
tension. If the door closes, decrease the spring tension.
3. Continue moving the spring pin until the door is balanced. Adjust both springs to
the same tension.
Note: If you choose the wood decoration door (about 8 lbs), you can
choose the fifth groove from the top groove. If you choose the metal
decoration door (about 17 lbs), you need fix the springs to the third
groove in the same method.
INSTALLATION
Adjusting the Legs
INSTALLATION
STEP 3: ADJUST THE LEVELING LEGS
1. Move the dishwasher close to the installation location and lay it on its back.
2. Measure the installation height and the dishwasher height.
3. Extend the leveling legs out from the dishwasher base .25 in. less than the
installation height.
Note: Make sure that the leveling feet are tightened all the way or
removed if trying to tilt the dishwasher.
Adjust to 0.25” less
than the installation
height
Adjust to 0.25” less
than the installation
height
or
Loading ...
Loading ...
Loading ...