Loading ...
Loading ...
Loading ...
Setting Setting
System Settings
• Resolution: Setting video resolution of footage recorded,
Front camera only: 2560 * 1440P 60fps, 2560 * 1440P 30fps,
1920*1080P 60fps, 1920*1080P 30fps
Front + Rear Camera: 2560 * 1440P 30fps + 1920 * 1080P 30fps, 1920
* 1080P 60fps + 1920 * 1080P 30fps
• Bitrate: You can set the bitrate for video. High bitrate may improve
the quality and smoothness of the video, especially when recording
fast motion or high contrast scenes. Using high bitrate mode may
decrease the amount of recording time available on your memory
card. Using low bitrate will save space and record for longer time.
• Live Video Source: Front camera / Rear camera / PIP mode 1 / PIP
mode 2.
• Loop Recording: Off / 1 / 2 / 3 / 5 / 10 minutes.
Recording will begin automatically after powering on with a micro
SD card in the device. Each recorded file is up to three minutes long,
with old footage being replaced when micro SD card storage is full.
• WDR (Wide Dynamic Range): Dynamic range is the radio of the
brightest portion of the image to the darkest portion of the image.
WDR images can record and represent a greater range of luminance
levels than can be achieved using more traditional methods.
• Exposure: Adjusting the value of the EV (Exposure Value) properly
can create better footage under different light sources. It ranges from
-2.0 to +2.0. You can adjust the EV for front and rear camera
separately. Default is set at 0.0.
• Parking Mode: There are 3 options under parking mode:
① Auto Event Detection
The camera will automatically record for 1 minute while a moving
object is detected while car is parked and will stop recording if no new
movement.
② Time Lapse recording
Time lapse record a video at low frames at 1 / 2 / 3 / 5 / 10 / 15 fps, It
keeps recording continuously without audio recorded.
③ Low Bitrate Recording
This mode record video in low bitrate 4MB/s for both front and rear.
It keeps recording continuously in mini file size with audio recorded.
Note: We recommend to buy VIOFO HK3 ACC hardwire kit cable for
parking mode recording.
• Enter Parking Mode Timer: Set the timer for entering parking mode.
• Parking Recording Timer: Set the parking recording duration.
• Time-lapse Recording: Record video from frames captured at
specific time intervals to conserve memory and reduce the time it
takes to review video. The default is off.
• Motion Detection: When activated, the camera will start recording if
there is movement in front of the camera. Once the camera does not
detect movement for 60 seconds, it stops recording and returns to
“Motion Detection” mode. The camera will record again in the time of
detecting a new movement.
19 20
.
.
You can set the product features according to your needs and
preferences using the camera button or the VIOFO app. To
enter the menu settings, please stop recording first.
Loading ...
Loading ...
Loading ...