Loading ...
Quick Operation Guide
For detailed operating guide, read corresponding contents in the Instruction Manual.
Switch on the appliance
Use tablet or liquid ll the
detergent dispenser
Check the rinse aid level
Load the baskets
Select a program
Start the dishwasherr
Change the program
Add forgotten dishes into
the dishwasher.
If the appliance is switched
off during a washing cycle.
Switch off the appliance
Turn off the water tap,
unload the baskets
If the appliance is switched off during a washing cycle, when switched on again, please reselect the
washing cycle and operate the dishwasher according to the original power-on state).
When the working cycle is nished, the buzzer of the dishwasher will sound 8 times, after then stop.
Turn off the appliance using the On/Off button. If the appliance is under standby mode, it will power off
automatically after 30 minutes without any operation.
Warning: Wait about 15 minutes before unloading the dishwasher to avoid scald, as the dishes and
utensils are still hot and more susceptible to break.
They could also be dried better. Unload the appliance, starting from the lower basket.
Open the door carefully.
Hot steam may escape
When the door is opened!
WARNING!
1. A running cycle can only be modied if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If in this case, the detergent
dispenser must be relled.
2. Press the Start/Pause button, the machine will be in standby state. Press the program button for
more than 3 seconds, then you can change the program to the desired cycle setting.
3. Press the Start/Pause button, then the dishwasher will run after 10 seconds.
1. Press the Start/Pause button to stop the washing.
2. Open the door a little.
3. After the spray arms stop working, you can open the door
completely.
4. Add forgotten dishes.
5. Close the door.
6. Press the Start/Pause button, then the dishwasher will run after 10
seconds.
Open the door, press the On/Off button to switch on the appliance.
Compartment A:
For each washing cycle.
Compartment B:
For programs with pre-wash only.
(Follow the user instructions)
Mechanical indicator C.
Electric indicator on control panel (if provided).
Scrape off any large food particles. Soften remnants of burnt food in pans, after then load the baskets.
Refer to the dishwasher loading instructions.
Close the door, press the Program button until the selected program lights up. ( See the section entitled
Operation Instruction)
Turn the water tap and press the Start/Pause button . The machine will start working after about 10
seconds.
Loading ...
Loading ...
Loading ...