Loading ...
Loading ...
Loading ...
6
INSTALLATION INSTRUCTIONS
ELECTRICAL CONNECTION - INDOOR
1. Lift the front panel and remove the cover.
2. Follow the circuit diagram to make the
connections.
3. Connect the cables to the terminals by following
the numbering. Use a cable size that is suitable
for the electrical power input and according to
all current national safety requirements.
REFRIGERANT PIPING SETTING POSITION
Before passing the piping through the wall, bind the
copper pipes, the drain pipe and the power cables
together with tape. Ensure that the water drain pipe
is at the bottom of the group.
WATER DRAINAGE
Draining water from the indoor appliance is crucial
for correct operation.
1. Ensure the drain hose is at the bottom of the
pipe, taking care not to create siphons.
2. The drain hose must slant downwards.
3. Do not bend or twist the drain hose or leave it
protruding and do not put the end of it in water.
If an extension is connected to the drain hose,
ensure that it is lagged when it passes into the
indoor unit.
4. If the piping is installed to the right, the pipes,
power cable and drain hose must be lagged
and secured onto the rear of the appliance with
a pipe connection.
A. Front panel
B. Wiring diagram
C. Terminal block cover
A
B
C
YES
NO NO
Loading ...
Loading ...
Loading ...