Loading ...
Loading ...
Loading ...
The optimum temperature and air quality
23
Safety device in case of low ambient
temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the ex-
ternal temperature should fall, a heater
element switches on automatically to
keep the temperature inside as constant
as possible. If the ambient temperature
continues to fall, the appliance switches
itself off automatically.
Isolator plate for thermal separation
The unit comes with a fixed isolation
panel that partitions the interior of the
wine conditioning unit into two separate
temperature zones. This enables you to
store different types of wine at the same
time, e.g., red wine and Champagne.
The isolation strips inside the glass
door prevent the exchange of heat
between the individual zones.
Setting the temperature
You can set the respective temperat-
ures using the two sensors below the
temperature displays.
To do so press the sensors under the
relevant temperature display.
Touch
- the temperature will get colder,
- the temperature will get warmer.
The temperature range being set will
flash in the display as you do this.
When you touch the sensors, you will
see the following changes in the re-
spective temperature display:
- Touching a sensor once: the last tem-
perature selected flashes.
- Each subsequent touch of a sensor:
The temperature is adjusted in 1°C
steps.
- Keeping your finger on the sensor:
changes the temperature continu-
ously.
Approximately 5 seconds after you re-
lease the sensor, the actual temperature
in the respective zone will be displayed
automatically.
Loading ...
Loading ...
Loading ...