Loading ...
Loading ...
Loading ...
9
To assemble the KTF841WHT
base stand (2 pieces):
1. The tower fan base stand comes
in two separate pieces that
connect with one another.
2. To assemble the base stand,
place the tower fan body on
its side. Remove the 3 fastening
screws from underneath the
tower fan section of the fan and
set aside. (See Fig. 5).
Fig. 5
3. Holding base stand piece (a)
with the curved side facing
towards the bottom part of the
tower fan body, position base
stand piece (a) screw hole over
the corresponding screw hole
located underneath the tower
fan body. (See Fig 6). Secure
base stand piece (a) with 1 of the
fastening screws. (See Fig. 7.).
Fig. 6
a
Fig. 7
a
4. Position base stand piece (b) with
the curved side facing towards
the bottom part of the tower fan
body, onto base stand piece (a)
by interlocking the six locating
posts located along the straight
edge of each of the base stand
pieces and by aligning the two
remaining screw holes located
underneath the tower fan body
with the corresponding screw
holes on base stand piece (b).
Firmly push down base stand
piece (b) until it is secured into
place with base stand piece (a)
(See Fig. 8). Secure base stand
piece (b) with the 2 remaining
fastening screws. (See Fig. 9).
Fig. 8
b
a
Using Your Kambrook Tower Fan continued
KTF840_841_WHT_IB_C18.indd 9 19/6/18 1:42 pm
Loading ...
Loading ...
Loading ...