Loading ...
Loading ...
Loading ...
8
Using Your Kambrook Tower Fan
Before first use
Remove your tower fan from its carton
and associated protective wrapping.
Unwind the cord to its full length and
remove any protective cardboard
or foam that may have been used
to minimise transportation damage.
Once assembled by following the
directions below, place the tower
fan on a firm, level surface in a stable
upright position. Visually inspect the air
inlet and outlets to ensure no foreign
material is blocking these areas.
WARNING: When
Unpacking the fan, check
to see you have received
all the items listed in
the parts list, before
discarding the packaging.
Assembling Your Tower Fan
To assemble the KTF840WHT
base stand (1 piece):
1. The tower fan base stand comes
as one piece.
2. To assemble the base stand,
place the tower fan body on
its side. Remove the 3 fastening
screws from underneath the
tower fan section of the fan and
set aside. (See Fig.1).
Fig. 1
3. Hold the base stand piece with
the curved side facing towards
the bottom part of the tower fan
body, thread the power cord
through the circle cord opening
located in the base stand piece.
(See Fig.2).
Fig. 2
4. Position base stand piece over
the corresponding screw holes
located underneath the tower
fan body. Press power cord into
the cord clip to keep it secure
(See Fig.3).
Fig. 3
5. Secure base stand piece with 3 of
the fastening screws. (See Fig.4).
Fig. 4
6. Return the tower fan to its upright
position; Its now ready for use.
KTF840_841_WHT_IB_C18.indd 8 19/6/18 1:42 pm
Loading ...
Loading ...
Loading ...