Loading ...
Loading ...
Loading ...
24
www.insigniaproducts.com
Disposal
Your cooler may not be treated as regular household waste. It should be
taken to an appropriate waste collection point for recycling of electrical
components. For information on local waste collection points, contact your
local waste removal agency or government office.
Tips on saving energy
Locate your cooler in the coolest area of the room, away from heat
producing appliances or heating ducts and out of direct sunlight.
Overloading your cooler forces the compressor to run longer.
Do not open the door too often, especially if the weather is very hot. Close
the door as soon as possible to prevent cool air from escaping.
Make sure that your cooler is sufficiently ventilated, with adequate air
circulation behind it.
Troubleshooting
Error codes
If the “HI”, “LO”, or “CL” error codes appear on the display for more than five
minutes, a power reset may rectify the issue (see Temperature alarms and
error codes on page 22). Unplug your cooler, wait five minutes, then plug it
back in. If the error code persists, contact consumer care or an authorized
service agent.
CAUTION: Do not try to repair your cooler yourself. Doing so invalidates the
warranty.
PROBLEM SOLUTION
Your cooler does not operate. Make sure that your cooler is plugged in and that the
plug is pushed completely into the outlet.
Check the house fuse/circuit breaker box and replace
the fuse or reset the circuit breaker.
If a power failure occurs, your cooler turns off. Wait
until the power is restored, then turn it on again.
Your cooler door does not
close completely.
Adjust the shelf properly.
Clean the door gaskets.
Level your cooler with the leveling feet.
Your cooler is not cold enough. Make sure that the door is closed properly.
Allow time for new beverages to cool, then check
again.
Set the control to a colder setting.
Loading ...
Loading ...
Loading ...