Loading ...
Loading ...
Loading ...
Frequently Asked Questions
86
Water intake fault
Problem Possible cause and solution
The buzzer sounds.
One of the following
fault messages appears
in the display:
Water intake fault
Open the water supply
The water supply is turned off.
Turn on the water supply fully.
Water intake Before fixing the fault:
Turn the dishwasher off using the sensor.
There is a problem with the water intake.
Turn on the water supply fully and start the pro-
gram again.
Clean the water intake filter (see "Frequently asked
questions").
The flow pressure at the connection point is lower
than 7.25 psi.
Contact a plumber.
The following message
appears in the display
during the Energy Saver
program:
Intake temp. too low
The intake water has not reached the required tem-
perature of 120°F (45°C) (see "Water connection, Wa-
ter intake").
Start the program again.
If the fault message appears again, select a differ-
ent program.
Loading ...
Loading ...
Loading ...