Loading ...
Loading ...
Loading ...
Options
58
EcoStart
The EcoStart function allows you to take
advantage of time variable economy
rates of electricity. Before you can use
this option, you must set up to three
electricity rate time zones (see "Settings
menu, EcoStart").
You then set the latest time at which the
program selected should end.
The dishwasher will start automatically
in the lowest rate zone within the time
set.
Use +/- to set the hour and confirm
with OK.
The hour will be saved and the minute
number pad will be highlighted.
Use +/- to set the minutes and con-
firm with OK.
The display will switch to the program
menu.
Confirm with Start to start the pro-
gram.
The estimated start time for the pro-
gram selected will appear in the display.
The Start indicator light will light up to
confirm that the program has started.
The selected program will start auto-
matically during the most cost effective
time zone. It will finish at the latest by
the set finish time.
Changing or deleting set times
You can change the set times or the
program before the start time in the dis-
play is reached.
Select the Change menu option.
The display will switch to the program
menu.
Select the Start at, Finish at or EcoStart
function.
To change the set time, select the de-
sired time with +/- and confirm with
OK.
To delete the set time, select the Re-
set option and confirm the reset time
with OK.
The display will switch to the program
menu.
If you open and close the door again
before the start time is reached, the
message Press Start to continue will ap-
pear in the display. Press the Start
sensor to restart the delay start.
Loading ...
Loading ...
Loading ...