Loading ...
Loading ...
Loading ...
Before using for the first time
23
Water hardness
The display changes to the screen for
setting the water hardness.
– The dishwasher must be pro-
grammed to the correct water hard-
ness for your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates
e.g. between 10 - 16 gr/gal (10 - 15
°d), always program the dishwasher
to the higher value (16 gr/gal or 15 °d
in this example).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________ gr/gal (°d)
The dishwasher is programmed at the
factory for a water hardness level of 1
gr/gal (1 °d).
Select the water hardness level for
your water supply and confirm with
OK.
See "Settings menu, Water hardness"
for more information.
The message Set up successfully com-
pleted will then appear in the display.
After confirming this message OK, the
refill indicators Refill salt and Refill
rinse aid may appear.
Add salt and rinse aid if necessary
(see "Before using for the first time,
Dishwasher salt" and "Rinse aid").
Confirm the messages with OK.
The display will switch to the main
menu.
The prompt to set up the dishwasher
for first use will not appear again after
you have run the first complete pro-
gram.
Loading ...
Loading ...
Loading ...