Loading ...
Loading ...
Loading ...
20 Cyclone Insert Installation - English
MAINTENANCE
• Always switch o power and unplug before cleaning and
maintenance.
• Mesh lters may discolour over time. Although product
is dishwasher friendly, depending on the amount of grease
and the type of dish-washing solutions used it may cause
the mesh lters to discolour faster.
WARNING
Surface and Filter Cleaning:
Clean with warm soapy water and a clean cloth. Do not use corrosive
or abrasive detergent or steel wool pads that can scratch the surface
of the machine.
Use non-abrasive stainless steel polish to bu out the luster and
grain. Scrub lightly.
e stainless steel lters trap residue and grease from cooking.
e lters should never have to be replaced but should be cleaned
thoroughly every 30 to 60 days depending on cooking habits. Filters
may be placed on the top rack of the dishwasher or soaked in warm,
soapy water.
Spray degreasing detergent and leave to soak if heavily soiled.
Replacing Light Bulbs:
• Always switch o electrical supply before carrying out any
operation on the appliance.
• In order to prevent the risk of personal injury, the halogen
lamps must be cooled before removal.
• Use LED bulb, 1.5W maximum per bulb, for SS130.
• *Bulb & socket may change.
WARNING
To change bulbs for SS130:
is range hood requires LED bulbs. (1.5W maximum per bulb)
To change the light bulb, remove light case from the light socket.
e light case can be accessed from the inside of the body of the
machine.
i. Disconnect the connecting wires of the light socket from the
motherboard wires.
ii. Remove grease lters and push light case outward away from
the machine.
iii. Replace with a new case.
To change bulbs for BX212/BX215/BX600/BX360/CLX60
1. Firmly press ngers against the light bulb and twist counter-
clockwise until bulb is loosened.
For a complete description of our maintenance and operating instructions you may visit us online at
www.CycloneRangeHoods.com to download your model’s Use and Care Guide.
Due to the fact that we are always striving to improve our products and take advantage of advances in technology there may
be slight variations in your product.
Loading ...
Loading ...