Loading ...
Loading ...
Loading ...
1-800=944=9044 (United States) 1
1=800=265=8352 (Canada)
J
i Visit our web site at
www,frigidaire.com
CONCERN POTENTIAL CAUSE COMMON SOLUTION
AUTOMATIC ICE MAKER
Ice maker is not • Ice maker power switch
making any ice. is Off.
• Ice maker has small
cube caught in
mechanism.
• Saddle valve on cold
water pipe is clogged
or restricted by foreign
material.
Ice maker is not maker iS producing
• Turn power switch to On ("I") position.
• Remove small cube from ice maker. The ice
and water filter cartridge may be clogged.
Replace filter cartridge.
• Turn off household water line valve. Remove
valve. Ensure that valve is not a self-piercing
saddle valve. Clean valve. Replace valve if
necessary.
The ice maker produces approximately four
making enough less ice than you expect, pounds of ice every 24 hours depending on
ice. Usage conditions.
| i
, Check to see if water , If it is, rep ace the ice and water fi ter
dispenser s dispensing cartridge
_ slower than normal
Freezer control is set _ Set freezer control tO colder Setting to
' too warm (freezer ice improve performance of the ice maker
maker). ' (freezer ice maker). Allow 24 hours for
temperature to stabilize.
:Ice maker will • Ice maker wire signal arm • Move item and release wire signal arm.
not stop making is being held down by Remove any ice cubes that are frozen
ice. some item in the freezer, together over the wire signal arm.
:Ice cubes _ Ice cubes are n0t being ; Remove ice container and discard ice from
are freezing used frequently enough: containe r.ice maker wil! produce fresh supply.
together o ce
I cubes are hollow i The ice and water fi ter cartridge may be
(partially frozen cubes clogged. Replace filter cartr!dge.
with water inside).
, _ Freezer contro! !Sset too , Set freezer control to colder setting. Allow
warm. 24 hours for temperature to stabilize.
OPEN:ING/CLOS:ING OF DOORS/DRAWERS
Door(s) will not ,
close, hard, causing other
door to 0Pen slightlY:
, Refrigerator is not level: , Ensure floor iS!evel and solid, and can
It r0cks on the flo0r adequately support _e refrigerator. Contact a
when moved slightlY, carpenter t0 €0_ a sagging 0r sloping floor.
, Refrigerator is touching Ensure floor is level and solid, and can
• a wal! or cabinet, adequately support the refrigerator.
, , Contact a carpenter to correct a sagging or
• " sloping floor.
Drawers are • Food is touching shelf • Remove top layer of items in drawer.
difficult to on top of drawer.
move, • Track that drawers slide • Ensure drawer is properly installedon track.
on is dirty. • Clean drawer, rollers, and track. See Care
& Cleaning.
Loading ...
Loading ...