Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENTS
TRANSAXLE MOTmON CONTROL LEVER
NEUTRAL ADJUSTMENT (See Fig. 27)
The motion control Heverhas been preset at the factory and
adjustment shouHdnot be necessary,
o Park tractor on HeveHsurface, Stop tractor by turning
ignition key to "OFF" position and engage parking
brake,
Loosen the adjustment boHtin front of the right rear
wheel
o Move motion controH Heverto the neutral position (N),
o Tighten the adjustment boHt,
_********'/ 02508 /_
.... _ N_ JE3
o
TO REMOVE WHEEL FOR REPAIRS
FRONT WHEEL (See Fig, 28)
BHockup axHe securely,
Remove axHecover, retaining ring and washers to aHHow
wheeH removal
o Repair tire and reassembHe,
RepHace washers and snap retaining ring secureHy in
axHegroove,
RepHace axHecover,
REAR WHEEL -
BHockrear axHesecureHy,
Remove five (5) hub boHtsto aHHowwheeHremoval
Repair tire and reassembHe, RepHace and tighten hub
boHtssecureHy,
NOTE: To seaHtire punctures and prevent fiat tires due to
showHeaks,tire seaHant may be purchased from your HocaH
parts deaHer,Tire seaHant aHso prevents tire dry rot and
corrosion.
FroG.27
TRANSMmSSmON REMOVAL/REPLACEMENT
ShouHd your transmission require removaH for service or
repHacement, it shouHd be purged after reinstaHHationand
before operating the tractor, See"PURGETRANSMHSSHON"
in the Operation section of this manual
TO ADJUST STEERmNG WHEEL ALmGN-
MENT
Hfsteering wheeHcrossbars are not horizontaH (Heftto right)
when wheeHsare positioned straight forward, remove steer-
ing wheeHand reassembHe per instructions in the AssembHy
section of this manual
WASHERS
RETAINING RING
AXLE
COVER
FmG.28
FRONT WHEEL TOEqN/CAMBER
The front wheel toe-in and camber are not adjustable on
your tractor, if damage has occurred to affect the front
wheel toe-in or camber, contact your nearest authorized
service center/department,
24
Loading ...
Loading ...
Loading ...