Loading ...
Loading ...
Loading ...
9
Let the filter grilles dry thoroughly before refitting
them.
a) Changing the LIGHT BULB
Disconnect the hood from the power supply.
Access the lamp area. Please note that you will have to take off the
grease grille at the back to access the lamp area.
Always replace burnt-out bulbs with olive-shaped 40 Watt bulbs.
After replacing the bulb, put the grease grille back.
_____________________________________________________________
b) Changing the CARBON FILTER
You will find that one filter will attach over the front of the fan motor (please
see figure at bottom of page).
The active carbon filter must be replaced regularly, at least once every four
months, to allow normal operation when in recirculation mode.
Before starting to fit the carbon filter, turn the omni-polar switch OFF
Changing the Carbon Filter – Note: carbon filters cannot be cleaned!
1) Remove the grease filter grilles.
2) Remove the old carbon filter by
twisting it anticlockwise
until it unlatches from the
side of the fan motor.
3) Place the new carbon filter (which
has two fixing tongues), turning
clockwise so that the tongues
latch onto the motor’s sides. (Fig.
3 - left).
4) Replace the anti-grease
metallic filter grilles.
NOTE
Maintenance – Changing the Light Bulb and Carbon Filter
Loading ...
Loading ...
Loading ...