Loading ...
Loading ...
Loading ...
OPERATION
Prior first use
Remove packaging, empty the drawer, clean the interior of the oven and the hob.
Take out and wash the oven fittings with warm water and a little washing
-up liquid.
Switch on the ventilation in the room or open a window.
Heat the oven (to a temperature of 2
50
, for approx. 30 min.), remove any stains and
wash carefully; the heating plates of the hob should be heated for around 4 min
a pan.without
When heat the oven for the first time, it is normal phenomenon to give off smoke and
peculiar smell. This will disappear about 30 minutes later.
OPERATION
11
10
Choose a pan with a diameter that is at least as large as the heating zone.Do not use
Choice of cookware
Controlling the heating zones of the ceramic hob
pans with a concave or convex base.Always remember or put a proper cover on the
pan.We recommend the use of pans with thick,even bases.
If the heating zones and pans are solied it is impossible to make full use of the heat.
Right
Wrong
WrongWrong Wrong
Heat level selection
Step
Suitable for
0
1-2
3
4-5
6
7-8
9
hot plate off,use of remaining heat
maintaining temperature,slow cooking,small quantities of food(min power)
slow cooking
slow cooking of large quantities,slow frying of large big chunks
frying,preparing soup basis
fry
boiling,browning,frying(maxmium power)
The heating zones have different levels of heat. The level of heat can be adjusted
-seclect the knob and then turn it ;
-set it to the right position.
The marks at the knob show the different levels reached by the heating zones.
the control panel,to select it you should:
gradually by turning the appropriate knob to the right or left.The knobs are located at
If the temperature of a heating zone
Zone heating indicator
exceeds 65 degree this is signalled
by an indicator which lights up for
When the heating indicator lights up it
warns the person using the cooker
against touching a hotheating zone.
For about 5 to 10 minutes after a
heating zone is switched off it will still
have residual heat that can be used,for
example to warm up or keep dishes
warm without switching on another
that zone.
heating zone.
Zone heating indicator
0
9
8
7
6
4
5
1
2
3
Electronic programmer
(Only for TCUF54)
1-Display field
2-Functions
P-60Hz indication
-Cooking indication
-Running indication
-Timer
A Automatic operation indication-
3-Buttons
-Timer
-Cooking time
-End of cooking time
A
1
2
3
-To decrease the numbers
on the digital display
-To increase the numbers
on the digital display
Loading ...
Loading ...
Loading ...