Loading ...
Loading ...
Loading ...
Deep (:_e__
Ibavy I!}uty
d sos
Ha_d W_h
Sp_ Only
O_OS _ SO_ Level
Te bpeu,_ e Sp_l Speed
This manual covers many models and not all cycles, options, or features listed are available on
every model. Console shown above for reference only. Your model may differ.
Cycle Options
Toselect or delete the Stain Clean, Extra Rinse, Extended
Spin or Signal volume, press Options until the blinking
light indicates the desired option. Then, while it is blinking,
press Select. The indicator will light when the option has
been selected. It will no longer be lighted when the option
has been removed.
Not all options are available on every model or are compatible
with every cycle. The indicator will not light if the option is
not available with that cycle.
To change the options once the cycle has begun,
press the Pause button, make the new selection and press
Start again.
The options selected for the cycle will be remembered and
recalled each time that cycle is selected in the future. To
return to factory settings, press the Start/Pause and Select
buttons at the same time and hold until the signal sounds.
Stain Clean
Use the Stain Clean option to add a 5-minute soak in
the middle of the wash portion of any cycle except Deep
Clean Sanitary and Hand Wash.
Extra Rinse
Use this option when additional rinsing isdesired to remove
excessdirt and detergent. It is recommended for heavily
soiled loads or if household members have sensitive skin.
Extra Rinse occurs before the final rinse when the liquid
fabric softener isdispensed.
Extended Spin
Use this option to add several additional minutes to the
final spin at the selected speed. This will improve water
extraction and decrease drying time.
Signal Volume
A signal will sound at the end of the cycle if this option is
selected. The signal has an adjustable volume level or can
be turned off.
Other Features
Delay Start
PressDelay Start to select a wash time convenient to your
schedule or during off peak energy hours. The start of the
cycle can be delayed for up to 14 hours. The delay time
selected will be displayed as 30, 60 or 90 minutes or 2
through 14 hours.
Control Lock
Toavoid having someone accidentally start or stop the
washer, press Options and Select at the same time and hold
for 10 seconds until "I_OC" isdisplayed alternately with the
estimated cycle time. To unlock the controls, press Options
and Select at the same time and hold 10 seconds until
"I_OC" is no longer displayed.
Status DisplaylStatus Lights
The estimated total cycle time will be displayed when the
cycle isselected. The time may increase if water pressure is
low, oversudsing occurs or the load becomes unbalanced.
The estimated remaining cycle time is displayed during the
cycle. The following indicators may be lighted during the
cycle:
Door Lock
Wash
Rinse
Final spin
Loading ...
Loading ...
Loading ...