Loading ...
Loading ...
Loading ...
Washing Procedures, continued
, Toselect or delete an option, press Options; then,
while the indicator isblinking, press Select. The indica-
tor will light when the option has been selected. It will
no longer be lighted when the option has been deleted.
To provide the best care for your laundry, not every
setting or option is available with every cycle. If a setting or
option is not available for the cycle selected, the indicator will
not light.
• Adjustments to acycle will be remembered and re-
called each time that cycle is selected in the future.
• Toreturn to factory settings, press the Start/Pause
and Select buttons at the same time and hold until the
signal sounds.
_l_e @ Wall'H_ (e ;_t
]{sll)_} @ Wail'liFt Wa['B @ _ di{]l @ /}// tl;:A
IJ_t//}_ _alu ('
Or{,_
9
Pressand hold both for ten seconds
to return to factory settings.
Start the washer.
• Close the door and press Start. The washer will not
operate with the door open. "PRU" will be displayed
as a reminder to close the door.
• If desired, select Oe/ay Start to delay the beginning of
the cycle for up to 14 hours depending on your model.
• As a safety measure, the door will automatically lock
during the entire wash cycle and the OoorLock indica-
tor will be lighted.
• Toadd a forgotten item to the wash drum, press Start/
Pause and open the door. "PRU" will be displayed
alternately with the estimated remaining cycle time.
Open the door, add the item, close the door and press
Start to resume the cycle.
• If changes to the settings or options are attempted
after the cycle starts, you will hear several beeps when
the buttons are pressed.To change the settings or op-
tions, press Pause, make the new selections and press
Start again.
• Tochange the cycle once the cycle has begun, press
Cancel, select a new cycle, and press Start again. Just
turning the cycle selector knob will not change the
cycle.
Tostop the cycle, press Cancel.
If the cycle is interrupted during spin, it will take ap-
proximately 2-3 minutes for the door lock to release. DO NOT
force open the door.
o
o
A signal will sound at the end of the cycle if the Signal
Volume option has been selected.
Remove items from the washer when the cycle ends
and place in dryer, line dry or dry flat as directed on the
fabric care label.
For best results
Follow the fabric care label instructions
on items to be washed.
Excesswrinkling, color transfer or odors may develop
in items left in the washer after the cycle has ended, if
not removed promptly.
- ENTRAPMENT and TIP-OVER HAZARD -
Do not leavethe door open if there are small children or pets
present. An open door could entice children to hang on the
door or crawl inside the washer. If there are no small children
present, you may leavethe door ajar to prevent odor build up.
Loading ...
Loading ...
Loading ...