Loading ...
Loading ...
Loading ...
BEFORECOOKING
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Ensure that the cooktop has been installed by a quaUified individual who has tested
the operation of the cooktop in accordance with the Installation Instructions. The
brass burner rings, burner caps, grates, knobs and spill protectors must be in
place for the cooktop to operate properly. AH cooktop components must be dean.
Be certain that the gas and eUectrbaU power supplies to the cooktop are operationak
Read this Use and Care Manual in its entirety prior to operating the cooktop.
OPERAT HGTHECOH @,,,,,,,,,,
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
To light a particular burner, press down on the corresponding control knob, then
immediately rotate the knob counterclockwise from the "OFF"
Figure 3 position to the "HI/LFE" position. Only the selected burner will
spark continuously until the gas ignites on that burner. The
...................*°" igniters will stop sparking as soon as the burner ignites.
Once the burner is lit, reduce the flame height if desired by
rotating the control knob further counterclockwise, then place the
utensil on the grate. See Figure 3.
Burner Control Valve
Loading ...
Loading ...
Loading ...