Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING YOUR GAS GRILL
Your Gas BBQ Grill comes to you fully assembled. We strongly recommend professional installation and hookup of the Gas BBQ grill. These
instructions will provide you with the measurements necessary for you or your builder to construct a masonry structure to house your outdoor
gas grill.
NOTE TO INSTALLER: Leave these instructions with the consumer for future reference. Your grill must be installed in accordance with all
local building codes.
SPECIFICATIONS FOR BARBECUE STRUCTURE
1. Masonry of your choice can be used for cabinet construction for the built-in gas grill. It must be non- combustible material. Keep in
mind when choosing a location for your grill that it should NOT be located under any overhead combustible construction. Upper and
ground level vents must be provided for combustion air on both sides of built-in cabinet. Vents on BBQ firebox must remain
unobstructed to allow for combustion air.
2. The BBQ Grill cabinet requires a wall opening of the following dimensions:
3. Place gas grill assembly into wall opening as shown in illustration. BBQ rests on side and back edges of BBQ grill.
4. For Propane Gas LP TANK MUST BE SECURED FASTENED AND STORAGE AREA MUST BE ISOLATED FROM GRILL AND
VENTED.
5. Do not use any combustible materials for this construction. Minimum horizontal clearance to adjacent combustible surface
from side
and back of the grill must be 21 inches.
CONNECTING TO GAS SOURCE
Refer to the following instructions and illustrations for typical gas supply connections. We strongly suggest professional installation and hook-
up of the Gas BBQ. IMPORTANT: Before connecting grill to gas source, make sure BBQ Grill control knobs are in “OFF”
LP Gas regulator assembly hose should be at least 20” long.
Use 20 LB LP gas tank only
6
Certificate 252521-2405769
Project 2405769
Figure No.(75)
Loading ...
Loading ...
Loading ...