Crosley CAW35114GW0 3.5 cu. ft. Capacity WASHER

User Manual - Page 11

For CAW35114GW0.

PDF File Manual, 20 pages, Read Online | Download pdf file

CAW35114GW0 photo
Loading ...
Loading ...
Loading ...
11
10. Select cycle options, if desired
Select the number of rinses by turning the Rinse knob to the
desired setting.
IMPORTANT: The Rinse knob must be set to an option
“w/ Fabric Softener” when using the fabric softener
dispenser. This ensures that fabric softener is added
at the correct time in the rinse for even distribution.
Set the Water Level knob to the Auto Sensing setting and
the washer will automatically sense the appropriate water
level for the load size and type.
Set the Water Level knob to the Deep Water Wash setting
and the washer will ll to the maximum water level.
NOTE: The cycle will be longer due to extended ll times
when using the Deep Water Wash setting.
11. Press Start/Pause button
to begin wash cycle
Press the Start/Pause button to start the wash cycle. When
the cycle has nished, the Done indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and prevent rusting of metal hooks, zippers,
and snaps.
Adding garment(s)
If you need to open the lid to add 1 or 2 missed garments:
Press the Start/Pause button. The lid will unlock once the
washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Add
garments, close lid, and press the Start/Pause button
again to restart the cycle.
NOTE: Washer will not ll with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes,
the water will pump out automatically.
Manual Soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press the Start/Pause
button and leave the lid closed. Once your desired soak time
has elapsed, press the Start/Pause button again to continue
the cycle. As long as the lid remains closed, your soak time
can be longer than 10 minutes. However, if the lid is opened
during the soak and remains open for more than 10 minutes,
the water will pump out automatically.
12. Manually add fabric softener
(models without dispenser)
During the nal rinse, wait until the washer has completed
lling, then press the Start/Pause button to pause the
washer. Lift the lid and add the measured recommended
amount of liquid fabric softener. Do not use more than
the recommended amount. Close the lid and press the
Start/Pause button again to start the washer.
IMPORTANT: Always select Extra Rinse when manually
adding fabric softener. The Extra Rinse option uses
additional water and agitation for proper fabric softener
distribution.
Loading ...
Loading ...
Loading ...