Loading ...
Loading ...
Loading ...
Fanaway Xiao Installation Instructions
12 | P a g e
X I A O - M E N A R D S V e r s i o n 1 . 0 10/ 2 0 21
INSTALLING THE REMOTE BATTERY
1 x 23A 12V (size) battery is required to operate the remote control. Remove the battery cover from the
back of the remote and 1 x 23A 12V (size) battery. Ensure the polarities are correct as shown on the
battery connector. (Batteries included.)
OPERATING THE REMOTE: (Fig.20)
Before you start using the remote, take the time to read through this section and get familiar with the
buttons and function of each button.
LED Indicator
The red LED indicator on the bottom of the transmitter will
flash when the buttons are active.
BUTTONS ON THE REMOTE
: Press the button to set fan running at High speed.
: Press the button to set fan running at Medium speed.
: Press the button to set fan running at Low speed.
: Press the button to turn OFF the fan.
LIGHT CONTROL BUTTON:
Press the button to turn the light ON/OFF.
Press and hold the button to access the light dimming function.
The remote has memory function. If the fan or light is turned off by the isolating switch, it will memorise
and recover the last status when turned on next.
REPAIRING THE FAN RECEIVER & REMOTE PAIRING
Should the remote and receiver lose control after installation or during use, the pairing of the
remote and the receiver must be repaired. Below are the operating symptoms and method to
repair the pairing of the ceiling fan remote and receiver.
Issues:
⚫ Loss of control - Fan is only running at high speed after installation
⚫ Loss of control - No reverse function after installation
⚫ Loss of control - Remote cannot communicate with receiver
Solution:
Fig. 20
Loading ...
Loading ...
Loading ...