Loading ...
Loading ...
Loading ...
English
English10
Before you start
Installation
Install the product according to the instructions in this manual and local codes.
Installing the product
1. Select a solid, level location with adequate space for the following clearances.
Top 25 mm
Sides 14 mm
Rear 15 mm
- If the minimum clearances are not met, performance will decrease due poor ventilation and
condensation may occur on the product exterior.
- Do not install the product in direct sunlight or hot and cold places. The ambient temperature must
be between 10 °C - 35 °C. If the ambient temperature is too high or too low, the product may not
operate normally, or performance may decrease.
A
2. Turn the levelling feet (A) clockwise or
counterclockwise to adjust the height until the
product is level.
B
NOTE
If the product wobbles or if you want to raise the height
of the rear side, assemble the provided rear levelling
feet (B) on the bottom-rear sides of the product.
Untitled-22 10 2022-05-13 2:23:53
Loading ...
Loading ...
Loading ...