Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE
Fill in datesas you complete regularservice Before Alter Every Every Yearly Service Dal
Use Use 5 hrs. 25 hrs.
i
Clean Unitand Labels P"
Check for Damagedor Worn Parts _'
Check for LooseFasteners and Parts _" _"
Check Chain Sharpness P, 1!
Guid_ B_rMaintenanc_ P' _"
Check VibrationMounts(if so equipped) _"
Check Clutch DrumSprocket P"
Clean AirFilter P"
Replace Spark Plug v" e"
Clean/Inspect SparkArrestorScreen and InspectMuffler v" v-
Check Guide Bar Lube e"
Filter in FuelTank P"
GENERAL RECOMMENDATIONS
The warrantyonthis unitdoes not cover itemsthat have
been subjectedto operator abuse or negligence. To re-
ceivefullvaluefrom thewarranty,theoperatormustmain-
tain unitas instructedinthis manual.
Some adjustmentswill need to be made periodicallyto
properlymaintain yourunit.
All adjustmentsinthe "Serviceand Adjustments"section
of thismanualshouldbe checked at leastonce each sea-
son.
• Oncea year,replacethespark plug,replaceair filterele-
mentand check guide bar and chainfor wear. A new
spark plug and a clean/new air filterelement assures
properair-fuelmixtureand helpsyourengine runbetter
and lastlonger.
• Followthe maintenanceschedule inthis manual.
WARNING
DISCONNECT THE SPARK PLUG BEFORE
PERFORMING MAINTENANCE EXCEPT
FOR CARBURETOR ADJUSTMENTS,
INSPECT THE ENTIRE UN_ REPLACE
DAMAGED PARTS. CHECK FOR FUEL
LEAKS AND MAKE SURE ALL FASTENERS
AREINPLACEANDSECURELYFASTENED.
BEFORE EACH USE
CHECK FOR DAMAGED/WORN PARTS
The followingdamaged/worn parts shouldbe referrec
yourSears Service Center.
NOTE: it isnormal for a smallamount ofoilto appear
der thesaw after engine stops.Do notconfusethiswi
leakingoiltank.
• On/Stop Switch- ensureon/stopswitchfunctionsp
ertybymoving the switchtothe =Stop"positionan(
surethat engine stops,thenrestartyourengineand;
tinue.
• Fuel Tank - discontinue use of chain saw if fuel
showssignsof damage or le_#,s.
• OilTank- discontinueuseofchainsaw ifoiltank
signsof damage or leaks.
• Chain Catcher - replace chain catcherif bent,
damagedin any way.
LUBRICATION CHART (Fig. 19)
CLEAN UNIT AND LABELS
• Cleanthe unitusinga damp clothwitha milddetergent.
• Wipe offthe unitwith a clean drycloth.
Figure 19
(_) Craftsrnanchain saw bar oil.
-16-
Loading ...
Loading ...
Loading ...