Blaupunkt MS46BT Bluetooth CD-MP3 player with FM and USB

1. Clock setting: in standby mode, press and hold the clock button few seconds from remote control to start the setting, and 24

hours time format will flare on display; press next and previous button to select the 12/24 time format, and press the clock

button again to confirm your selection; then the hour digits will flare on display ; press next and previous button to adjust the

hour, and press the clock button again to confirm; then the minute digits will flare on display, press next and previous to adjust

minute, then press clock button again to confirm and finish the clock setting.

Time synchronization: During the clock time setting procedure, you can see the “ SYNC-OFF” flare on display. Press previous or

next button to select “ SYNC-OFF” or “ SYNC-ON”, then press clock button to confirm it. When you selected “ SYNC-ON”, the clock

time will synchronized update on the unit in case of received the available clock time signal from local radio station.

2. Playback wake up (alarm) time setting: in clock time interface, press and hold alarm button from remote control few

source between FM radio/CD/USB, press alarm button again to confirm the selection; then set up the wake up hours/minutes

and playback volume by using next/previous and alarm button.

the setting alarm volume. You can press the power button to turn off the playback.

Trouble shooting

1. Cannot power on the unit

a. Please check if the AC power cord was connected wall outlet properly.

b. Please contact with service center in case of the problem remains.

2. No sound output.

a. Please try to adjust the volume.

b. Please check if you selected the correct play mode.

c. Please contact with service center in case of problem remains.

3. The CD disc cannot read out, or intermittent sound during playback.

c. Please switch to other station for listening.

5. Intermittent sound during Bluetooth playing.

a. Please try to move your Bluetooth device more close to the unit.

b. Please try turn off the Bluetooth function and repair it again.

6. The remote control does not work well.

a. Please close and direct to the remote control sensor for operation.

b. Please replace the battery with fresh one due to weakness battery power.

Specification

Power source: AC 100-240V, 50/60 Hz

CD compatible: CD/CD-R-RW/MP3/WMA