Loading ...
Loading ...
Loading ...
2. Preset station picking up: in radio mode, press the previous and next from remote control or front panel of main unit to pick
up the preset station.
3. Manual tune or auto scan: short press the tune +/- button to increase or decrease 0.05MHz frequency per step base on the
current station; press and hold the button 2 seconds to auto scan the available FM station in upward or downward frequency,
and will stop and play the available station automatically. You can also get the auto scanning operation by long press the
previous/next button on front panel.
4. Station memory manually: using the tune +/- button to tune the favorite station that you desire to save; press the memory
button from remote control first, then the preset station digits will flare on display, press the previous and next button to
switch the preset station location that you desire to save; Then press the memory button to confirm it; and the current FM
station will be saved. Please repeat the operation to save other station.
5. RDS: in radio mode, there can rolling show the text information on display in case of the listening radio station support radio
data system, and broadcast such signal. Press the RDS button repeatedly from remote controller can check the further
information.
Notes: the unit will show the available preset station only.
USB operation
The product includes USB playback function, which can decode and play the music from a USB storage device. Before start the
operation, please copy the MP3 format music into a USB stick. The max supported USB stick device is up to 32 GB.
1. Before start the USB playback, please make sure the USB stick was plugged properly into the USB port. Then switch to USB
playback mode by press the source or USB button. Then unit will decode and start to play the music automatically after few
seconds.
2. In USB mode, you can achieve the play and pause, stop, mute, repeat, track selection, EQ, fast-forward and fast-rewind
function etc. Please reference the operation from the general operation part on this manual.
Notes:
a. Connect the USB stick by a USB extension cable for playback is not recommended which may produce noise or intermittent
sound due to audio data loss during transfer.
b. Decode and playback all MP3/WMA format music is not guaranteed.
c. The max supported USB device is 32GB.
d. Some USB sticks may take a little long time to playback; please kindly note this is not malfunction.
Bluetooth operation
This product includes Bluetooth function, which can wireless playback the music from other Bluetooth device.
1. Press the source button repeatedly enter to Bluetooth mode, the display will show “ BT” in Bluetooth mode. Enable the
Bluetooth function and start to search available device on your Bluetooth device (please reference the device manual for
operation), then check the available Bluetooth device list on your device.
2. Select “ BP MS46BT” for pairing; a short notice sound will comes out from the speaker after the Bluetooth paired successfully.
3. Select and play the music from your Bluetooth device, then the music will output from the micro system.
4. Press the previous/next button can select last and next track during playing. Press and hold the stop button 3 seconds can
disconnect and quit the unit with current paired Bluetooth device.
5. In Bluetooth mode, you can achieve play/pause, mute, EQ etc. function. Please reference the operation from the general
operation part on this manual.
Notices:
a. All Bluetooth devices are not guaranteed for pairing successfully due to different design and brand.
b. The best working distance of Bluetooth is within 10 meters without any obstacle in between.
c. The unit only can pair and work with one Bluetooth device in one time.
d. Please quit the current Bluetooth pairing before pair with other device, otherwise the “ BP MS45BT” will not show on the
device list.
AUX IN/line in/MP3 link operation
In order to wire playback the music from other player or source, please follow up below operation.
1. Using the audio cable(3.5mm to 3.5mm stereo connector，not included) connect the AUX IN jack(3.5mm stereo type) on
front panel of main unit, and the another 3.5mm stereo connector connect with line-out or headphone jack of outsourcing
player.
2. Select the music and play on your player, then the sound will output from the micro system.
3. In AUX IN playback mode, the main control is on the outsourcing player side. But you also can control the volume, EQ and
mute the sound on the micro system side.
Sleep: in playing mode( CD/radio/USB/Bluetoth/AUX), short press the sleep button repeatedly to select sleep time between
15/30/45/90/120/150/180/off. The unit will switch to standby and music off automatically when the sleep time is being on.
Short press the sleep button again can review the remaining sleep time.
Clock time and alarm (playback wake up and auto play) setting
The unit includes clock time and alarm setting, which allows you to enjoy the entertainment base on a personal wake up time,
and the music will start to play automatically when the setting time is coming on.
8
Loading ...
Loading ...
Loading ...