Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 57914779745/A
e
Showroom (for showrooms only)
1. After entering the settings menu, turn the
temperature knob until the showroom
function is selected.
2. Press the temperature knob to confirm.
3. Turn the temperature knob to activate the
showroom function.
4. Press the temperature knob to confirm or
wait 10 seconds.
CLEANING AND MAINTENANCE
Cleaning the appliance
Cleaning the surfaces
To keep the surfaces in good condition, they
should be cleaned regularly after use. Let them
cool first.
Ordinary daily cleaning
Always and only use specific products that do
not contain abrasives or chlorine-based acids.
Pour the product onto a damp cloth and wipe
the surface, rinse thoroughly and dry with a soft
cloth or a microfibre cloth.
Food stains or residues
Do not use steel sponges and sharp scrapers as
they will damage the surface.
Use normal, non-abrasive products and a
wooden or plastic tool, if necessary. Rinse
thoroughly and dry with a soft cloth or a
microfibre cloth.
Do not allow residues of sugary foods (such as
jam) to set inside the oven. If left to set for too
long, they might damage the enamel lining of
the oven.
Cleaning the door
Door disassembly
For easier cleaning it is recommended to
remove the door and place it on a tea towel.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges indicated in
the figure.
2. Grasp the door on both sides with both
hands, lift it forming an angle of around 30°
and remove it.
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
This mode allows the appliance to
deactivate all heating elements, while
keeping the control panel active.
The activated showroom is indicated on
the display by the indicator light on.
To use the appliance normally, set this
function to OFF.
See General safety instructions.
Loading ...
Loading ...
Loading ...