Loading ...
Loading ...
Loading ...
CARING FOR YOUR DRYER
When you have finished using your dryer
●●
Unplug the machine from the power socket.
●●
Wipe around the door to remove any remaining condensation and foreign matter.
●●
Clear the lint filter and empty the water tank (if not set up to automatically drain).
Cleaning your dryer
Before you start cleaning your dryer, ensure that it is disconnected from the power
Cleaning the control panel and outer surfaces of the dryer
Use a soft damp cloth to wipe all surfaces, then wipe dry. Avoid using chemical or
scouring cleaners, as these will damage the paint and plastic surfaces of your dryer.
Cleaning the inside of your dryer
It is important that you occasionally clean the inside of your dryer. If the drum has any
residual dirt or lint stuck to it, remove this and wipe it clean with a damp cloth. Do not
leave any metal objects in the drum, as these may cause rust.
Cleaning the lint filter
●●
clothes during the drying cycle are collected in the lint filter.
Lint is generally formed during wearing and washing. Fibres (ie lint) released from the
●●
It is important to clean the lint filter after every load, as the lint produced in the drying
process can become a fire hazard if it is allowed to accumulate in or around your dryer.
●●
The lint filter is located in the door opening (at the bottom).
●●
There is a warning light that will flash at the beginning of every cycle to remind you to
clean the filter. The warning light will also flash on and off during the cycle if the filter
becomes blocked. The filter should be cleaned as soon as the ‘Lint Filter’ light starts
flashing. Lint becomes a fire hazard if left to build up, and will reduce the efficiency of
your dryer.
To clean the filter:
1
Open the dryer door.
2
Remove the lint filter by pulling it up and out of the
filter slot. Open it out and wipe the surfaces clean
with your hand.
3
Close the lint filter and place it back in the opening.
Ensure the filter is fitted correctly back in place
before operating the dryer.
IMPORTANT!
If the lint filter becomes damaged, contact your
Haier trained and supported service technician
to arrange getting a new filter. Do not operate
your dryer with a damaged lint filter or without
the filter in place, as this will cause damage
to your dryer and is a fire hazard.
Lint filter
16
Loading ...
Loading ...
Loading ...