Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
Electrical connection
1
This appliance must be connected to a 220V - 240V, 50Hz, sinusoidal, 10A electrical supply
2
Uncoil the power cord, remove and discard the plastic pin cover and plug into a
power socket.
3
Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
●
Check the power cord for damage and make sure it is not squashed or twisted when installing
●
Always remove the power cord from the power socket by the plug, not by the cord.
IMPORTANT!
●
Do not touch or operate the machine with wet hands or with bare-feet.
●
A damaged power cord must be replaced by a Haier trained and
supported service
order to avoid a
there is risk
●
Do not operate this machine if it has been damaged during transport. Contact your
Haier dealer
WARNING!
The appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by a utility.
or Haier trained and supported service technician.
of electric shock.
hazard. The technician, its service agent or similarly qualified persons in
appliance must not be operated until it is repaired, as
the dryer.
8
Loading ...
Loading ...
Loading ...