Loading ...
Loading ...
Loading ...
63
GB
Additional Information
MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-14(1)
* Radio may not be received depending
on the radio wave conditions or the
housing environment in your area.
BLUETOOTH device
Pairing cannot be performed.
••
Move the BLUETOOTH device
closer to the system.
••
Pairing may not be possible if
other BLUETOOTH devices are
present around the system.
In this case, turn off the other
BLUETOOTH devices.
••
Make sure to enter the correct
passkey when selecting the
system’s name (this system) on
the BLUETOOTH device.
The BLUETOOTH device cannot
detect the system, or “BT OFF”
appears on the display.
••
Set the BLUETOOTH signal to “BT
ON” (page 44).
Connection is not possible.
••
The BLUETOOTH device you
attempted to connect does not
support the A2DP profile, and
cannot be connected with the
system.
••
Enable the BLUETOOTH function of
the BLUETOOTH device.
••
Establish a connection from the
BLUETOOTH device.
••
The pairing registration
information has been erased.
Perform the pairing operation
again.
The sound skips or fluctuates, or
the connection is lost.
••
The system and the BLUETOOTH
device are too far apart.
••
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
••
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
The sound of your BLUETOOTH
device cannot be heard on this
system.
••
Increase the volume on your
BLUETOOTH device first, then
adjust the volume using +/–.
There is severe hum, noise, or
distorted sound.
••
If there are obstacles between
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
••
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
••
Turn down the volume of the
connected BLUETOOTH device.
Control for HDMI (“BRAVIA”
Sync)
The system does not turn on even
when the TV is turned on.
••
Hold down SHIFT and press
SETUP, then set [HDMI SETUP]
– [CONTROL FOR HDMI] to [ON]
(page 35). The TV must support
the Control for HDMI function
(page 49). For details, refer to
the operating instructions of your
TV.
••
Check the speaker settings of the
TV. The system power syncs with
the speaker settings of the TV.
For details, refer to the operating
instructions of your TV.
Loading ...
Loading ...
Loading ...