Hitachi 57SWX20B projection television

User Manual - Page 23

For 57SWX20B.

PDF File Manual, 72 pages, Download pdf file

Loading ...
Loading ...
Loading ...
HOW TO USE THE REMOTE TO CONTROL YOUR TV
(_) CD, TAPE, AMP buttons
When pressed, each of these buttons will blink to indicate the remote is in Audio mode. (see page 35)
(_ CHANNEL selector buttons
CHANNEL selector buttons are used to select channels, lock access code, etc.
Enter one, two, or three numbers to select channels. Enter "0" first for channels 1 to 9, or simply press the single digit channel you
wish to tune then wait a few seconds for the TV to tune. For channels 100 and above, press the "1" button, wait until two dashes
appear next to the channel display on your TV, then enter the remaining two numbers using the number buttons.
Channel selection may also be performed by pressing CH up (A) or down (_').
I NOTE: The TV may not receive some channels if you are not in the correct ANTENNA/CABLE mode. (see page 57) I
(_) SLEEP button
Press this button to display the sleep timer in the lower left corner of the screen. Every subsequent press of this button will add 15
minutes to this timer, up to a maximum of three hours. Once set, use STATUS when you want to view time remaining. If the SLEEP
button is pressed while the timer is set, it will reset to the original condition.
(_) INFO button
Press this button when you want to check the channel being received, the picture source, if the channel has stereo (ST) or second
audio program (SAP), the time, CHANNEL ID and if the SLEEP timer is set.
Audio
Broadcast,
Wide
Mode.
Vwtua]
HD_
Picture
Closed Mode --
Captioning --
off Timer --
TV Time Out m
Sleep Timer m
Broadcast
Ratil_g Main Picture Source
/ ,wLLsv
Stereo (480i) Ant A 15 / Channel iD/Video ID
ST/SA PIP TV-PG DLSV ABCDEFG "a
10:10AM'_ --Tree
PiP Ant C 46 1234 "4 --PiP/Sub Picture
SoE_rce
"_16:9 Standard
"_1080i
_'Movies
_-CC On _ q
_) Off 10:05AM !
I_ _ime Out 10:05 AM
_'(_ Sleep 0:01 I j
--pip/Sub-Picture
When an S-VIDEO
Input is connected to
VIDEO: 3.
When a COMPONENT
VIDEO: Y-PBPR Input
is connected to
VIDEO: 1.
ANTENNA button
The ANT button will select between Antenna A and Antenna B each time the button is pressed.
ANT
C.C. button
Press this button to quickly turn the Closed Caption feature on, off and auto. You can also access this feature on the Setup menu.
(See age 62).
23
Loading ...
Loading ...
Loading ...